DRIVEConn® MT - OCT

In the machine tools market the OCT (One Cable Technology) solutions are becoming increasingly common. The single-cable solution ensures that instead of the traditional servo cable for power supply and sensor cable for the position information, the transmission and signal are integrated into one single cable. The precondition for the use of a single-cable solution between the servomotor and the controller is the use of a hardware-based encoder designed for this purpose. Since the encoder is permanently connected to the servomotor, the system shall be made available to the final customer by the manufacturer of the servo motor. MotionCables began the development of her OCT solutions with SICK®, creating a cable for their HIPERFACE® DSL system that has been approved and qualified by SICK®: now MotionCables is therefore a SICK® certified manufacturer for this cable. Strengthened by this experience MotionCables has developed a version for the HMC 6® Full Digital system of Heidenhain® based on the EnDat 2.2 protocol as well as the analogus fro B&R®. Both cables have been tested in our laboratories and in their versions (fixed installation, mobile, high performance) have operated up to ten million cycles. With regard to the HIPERFACE® DSL cable MotionCables has recently developed a new version with dual Shield, even more powerful for data transmission quality and with an higher rate in noise reduction up to 4,5 kV @ 10 MHz.

MotionOCT DSL

MotionOCT EnDat 2.2