MotionCables Logo

DRIVEConn® MT - OCT HYBRID SERVO

Hybrid Servo S210 Sinamics®

 HP
PUR
0.6 / 1.0 kV
Hybrid Servo S210 Sinamics®
High Performance
HP

The new single cable system from Siemens®, for the Sinamics S210 and for the Sinamics S120M system. MotionCables offers you both the version for Motion-Connect 500 - codes 6FX5002-8Qn04 and 6FX5002-8QN08 - and for the MotionConnect 800PLUS version.

SINAMICS S210 ® is a registered trademark of Siemens - Our product complies with this standard.
CONSTRUCTION FEATURES
Data Conductor Extra Flexible Bare Copper
Insulation Special Polypropylene Grey, Pink, Purple, Yellow
Tape Non-Woven Tape
Shield ALU/PET Tape
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Inner Sheath Polyolefin Grey
Control Conductor Flexible Bare Copper
Insulation Special Polypropylene Turquoise/Black; Turquoise/White
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Power Conductor Flexible Bare Copper
Insulation Grey, Black, Brown, Yellow/Green
General Tape Non-Woven Tape
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Separator Easy Strip Away Tape
Outer Sheath PUR
Colour Orange / RAL 2003
PRODUCT'S FEATURES
Operating Voltage
0.6 / 1.0 kV
Temperature
static -50 °C / +90 °C
dynamic -40 °C / +90 °C
Dielectric Strength
4.0 kV acc.to EN 50395 Part 6 - 7
Insulation Resistance
≥ 1 GΩ x km
acc.to EN 50395 Part 8
Electrical Resistance
IEC 60228 Cl.6
EN 50395 Part. 5
 MECHANICAL FEATURES
Speed
600 m/min
Bending Radius
6.5 x Ø
Acceleration
60 m/sec2
Cycles
10.000.000
Torsion
±30°/1000 mm
Pulling
≤ 20 N/mm2

MotionCables Code OEM Code Formation Outer Diameter Copper Weight Outer Sheath
HDSSI22Z10UP-A 6FX8002-8QN04-1 [4G0.38+(2x0.38)+(4x0,20)] 9.5 79.0 RAL 2003 Orange PUR
HDSSI19Z10UP-A 6FX8002-8QN08-1 [4G0,75+(2x0,50)+(4x0,20)] 10.4 80.0 RAL 2003 Orange PUR
HDSSI15Z10UP-A 6FX8002-8QN11-1 [4G1,5+(2x1,50)+(4x0,20)] 12.3 162.0 RAL 2003 Orange PUR
HDSSI13Z10UP-A 6FX8002-8QN21-1 [4G2,5+(2x1,50)+(4x0,20)] 13.3 214.0 RAL 2003 Orange PUR
Note
The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.