DRIVEConn® MT - BUS

MotionBUS Industrial Ethernet Cat7

HP
PUR
30 V

High Performance

The enormous success of the Ethernet technology in the industrial enviroment has increased the request of these type of cables for application in markets much bigger than that of industrial automation. Taking into consideration all the different installation and issues that can be found in a classic industrial environment, MotionCables is able to offer a wide range of products suitable to support Ethernet protocols where requested.

CONSTRUCTION FEATURES

Conductor	Extra Flexible Bare Copper
Insulation	Polyethylene
Shield	ALU/PET Tape
Shield	tinned copper wire braid O.C. ≥ 85%
Separator	easy strip away tape
Outer Sheath	PUR
Colour	Green / RAL 6018

PRODUCT'S FEATURES

	Operating Voltage 30 V
	Temperature static -50 °C / +90 °C dynamic -40 °C / +90 °C
	Dielectric Strength 1.5 kV acc.to EN 50395 Part 6 - 7
	Insulation Resistance ≥ 1 GΩ x km acc.to EN 50395 Part 8
	Electrical Resistance IEC 60228 Cl.6 EN 50395 Part. 5
	Impedance 100 Ω
	Capacitance 48 µF/m

MECHANICAL FEATURES

	Speed 600 m/min
	Bending Radius 6.5 x Ø
	Acceleration 60 m/sec²
	Cycles 10.000.000
	Torsion ±30°/1000 mm
	Pulling ≤ 20 N/mm²

MotionCables Code	OEM Code	Formation	Outer Diameter	Copper Weight	Outer Sheath
DFSHH26P04UP-A	-	[4x(2x26 AWG)]	6.4	22.0	RAL 2003 Orange PUR
DFSHH24P04UP-VE	-	[4X(2X26 AWG)]	6.4	22.0	RAL 6018 Green PUR
Note The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.

Attenuazione

MHz	23 awg db/100 m
1.0	≤ 2,0
4.0	≤ 3,7
10.0	≤ 5,9
16.0	≤ 7,4
20.0	≤ 8,3
31,25.0	≤ 10,4
62,5.0	≤ 14,9
100.0	≤ 19,0
155.0	≤ 24,0
250.0	≤ 31,0
500.0	≤ 45,3
600.0	≤ 50,1