DRIVEConn® MT - BUS

MotionBUS Profibus

PROFIBUS standard was released in 1990 and then recognized by German DIN, European EN 50170 and international IEC 61158 and IEC 61784 standards. PROFIBUS is a linear system with two connections based on the RS 485 serial communication. The advantage of PROFIBUS is the possibility to have two different level variations (DP or Decentralized Periphery for high-speed performances and FMS or Fieldbus Message Specifications for ICT performances) in the same transmission technology. A shielded copper twisted pair is used as the means of transmission. With a transmission rate of up to 12 Mbps it can cover a distance of 100 metres.

CONSTRUCTION FEATURES

PRODUCT'S FEATURES

	Operating Voltage
	Temperature static dynamic
	Dielectric Strength
	Insulation Resistance
	Electrical Resistance
	Impedance
	Capacitance

MECHANICAL FEATURES

	Speed
	Bending Radius
	Acceleration
	Cycles
	Torsion
	Pulling

MotionCables Code	OEM Code	Formation	Outer Diameter	Copper Weight	Outer Sheath
Note The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.

Attenuazione

MHz	22 awg db/100 m	24 awg db/100 m
9,60.0	≤ 0,22	≤ 0,30
38,40.0	≤ 0,36	≤ 0,50
4000.0	≤ 2,0	≤ 2,4
16000.0	≤ 4,0	≤ 4,8