MotionCables Logo

DRIVEConn® MT - OCT HYBRID SERVO

Hybrid Servo HMC6®

 HP
PUR
0.6 / 1.0 kV
Hybrid Servo HMC6®
High Performance
HP

With the HMC solution (Hybrid Motor Cable), HEIDENHAIN has integrated the encoder cable into the power cable. Thus, only a single cable is now needed between the motor and the electrical cabinet. The HMC 6 single-cable solution was specifically designed for the HEIDENHAIN EnDat22 interface. With purely serial data transmission, cable lengths of up to 100 m can be realized. However, with HMC 6 all other encoders equipped with a purely serial RS-485 interface (e.g., SSI) can be connected as well. A wide range of encoders can therefore be used without the need for introducing a new interface. The HMC solution combines the wires for the encoder, motor, and brake into a single cable, which is connected to the motor via a special connector. For connection to the frequency inverter, the cable is split into power connections, brake connections, and an encoder connector.
CONSTRUCTION FEATURES
HMC 6 Conductor Flexible Tinned Copper
Insulation Polyolefin - Grey, Pink, Purple, Yellow, White/Green, Brown/Green + Drain Wire
Shield ALU/PET Tape
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Control Conductor Flexible Bare Copper
Insulation Special Polypropylene - Black, Blue, Brown
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Power Conductor Flexible Bare Copper
Insulation Special Polypropylene - White, White/Black, Yellow/Green
General Shield Tinned Copper Wire Braid O.C. ≥ 85%
Separator Easy Strip Away Tape
Outer Sheath PUR
Colour Black / RAL 9005
PRODUCT'S FEATURES
Operating Voltage
0.6 / 1.0 kV
Temperature
static -50 °C / +90 °C
dynamic -40 °C / +90 °C
Dielectric Strength
4.0 kV acc.to EN 50395 Part 6 - 7
Insulation Resistance
≥ 1 GΩ x km
acc.to EN 50395 Part 8
Electrical Resistance
IEC 60228 Cl.6
EN 50395 Part. 5
 MECHANICAL FEATURES
Speed
600 m/min
Bending Radius
6.5 x Ø
Acceleration
60 m/sec2
Cycles
10.000.000
Torsion
±30°/1000 mm
Pulling
≤ 20 N/mm2

MotionCables Code OEM Code Formation Outer Diameter Copper Weight Outer Sheath
HDS15G12UP-N ENDAT 2.2 (3x1,5)+1x1,5+2x1+(2x0,24+4x0,09) 12.5 86.0 RAL 9005 Black PUR
HDS13G12UP-N ENDAT 2.2 (3x2,5)+1x2,5+2x1+(2x0,24+4x0,09) 14.2 113.0 RAL 9005 Black PUR
HDS11G12UP-N ENDAT 2.2 (3x4)+1x4+2x1+(2x0,24+4x0,09) 16.5 150.0 RAL 9005 Black PUR
Note
The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.