DRIVEConn® MT - SERVO

SERVO eq. BOSCH REXROTH®

BP
PVC
0.6 / 1.0 kV

Basic Performance

Cables conforming to BOSCH REXROTH INDRAMAT® standard, designed for power and control actuator drive systems. Highly flexible conductors and PVC-resistant PVC or PUR outer sheaths provide a suitable product for a wide range of high performance, ranging from fixed applications to high-speed drag chains. High dynamic parameters, reduced bending radii, and chemical resistance to oils and industrial fluids. The PUR sheath version is also suitable for low-temperature applications. Low dielectric capacity, shielded high-tinned copper braid for high EMC protection and an Indramat standard construction. The cables are UL / CSA and EAC approved and follow the DESINA standard.

Note: The reported Indramat INK codes are trademarks of Bosch Rexroth AG and are for comparative purposes only. Desina® is a registered trademark of the German machine tool builders (VDW). The article codes refer to existing MotionCables products. The drawings are not on a scale and do not represent a detailed picture of the products to which they refer.

CONSTRUCTION FEATURES

Conductor	Flexible Bare Copper Bare Copper
Control Insulation	Special Polypropylene
Colour Code	Black, White Numbered 5, 6, 7, 8
Shield	Tinned Copper Wire Braid O.C. ≥ 85%
Power Insulation	Special Polypropylene
Colour Code	Black, White Numbered 1, 2, 3, Y/G
Shield	Tinned Copper Wire Braid O.C. ≥ 85%
Separator	Easy Strip Away Tape
Outer Sheath	PVC TM5
Colour	Orange / RAL 2003

PRODUCT'S FEATURES

	Operating Voltage 0.6 / 1.0 kV
	Temperature static -30 °C / +90 °C dynamic -15 °C / +30 °C
	Dielectric Strength 4.0 kV acc.to EN 50395 Part 6 - 7
	Insulation Resistance ≥ 1 GΩ x km acc.to EN 50395 Part 8
	Electrical Resistance IEC 60228 Cl.5 acc.to EN 50395 Part. 5

MECHANICAL FEATURES

	Speed 180 m/min
	Bending Radius 10 x Ø
	Acceleration 2,0 m/sec²
	Cycles 200.000
	Torsion ±30°/1000 mm
	Pulling ≤ 20 N/mm²

MotionCables Code	OEM Code	Formation	Outer Diameter	Copper Weight	Outer Sheath
SFSI19G06UR-A	INK 670	[4G0,75+(2x0,50)]	9.2	73.0	RAL 2003 Orange PVC TM5
SFSI17G08UR-A	INK 653	[4G1,0+2x(2x0,75)]	11.6	170.0	RAL 2003 Orange PVC TM5
SFSI15G08UR-A	INK 650	[4G1,5+2x(2x0,75)]	12.2	189.0	RAL 2003 Orange PVC TM5
SFSI13G08UR-A	INK 602	[4G2,5+2x(2x1,0)]	14.6	223.0	RAL 2003 Orange PVC TM5
SFSI11G08UR-A	INK 603	[4G4+(2x1)+(2x1,5)]	16.3	309.0	RAL 2003 Orange PVC TM5
SFSI09G08UR-A	INK 604	[4G6+(2x1)+(2x1,5)]	18.1	395.0	RAL 2003 Orange PVC TM5
SFSI07G08UR-A	INK 605	[4G10+(2x1)+(2x1,5)]	21.8	575.0	RAL 2003 Orange PVC TM5
SFSI05G08UR-A	INK 606	[4G16+2x(2x1,5)]	25.5	850.0	RAL 2003 Orange PVC TM5
SFSI03G08UR-A	INK 607	[4G25+2x(2x1,5)]	28.8	1250.0	RAL 2003 Orange PVC TM5
SFSI02G08UR-A	INK 667	[4G35+2x(2x1,5)]	30.9	1588.0	RAL 2003 Orange PVC TM5
SFSI01G08UR-A	INK 668	[4G50+2x(2x2,5)]	36.3	2351.0	RAL 2003 Orange PVC TM5
Note The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.