DRIVEConn® MT - BUS

MotionBUS EtherCAT

BP
PVC
300 V

Basic Performance

EtherCAT is by and large the fastest Industrial Ethernet technology, but it also synchronizes with nanosecond accuracy. This is a huge benefit for all applications in which the target system is controlled or measured via the bus system. The rapid reaction times work to reduce the wait times during the transitions between process steps, which significantly improves application efficiency. Lastly, the EtherCAT system architecture typically reduces the load on the CPU by 25 – 30 % in comparison to other bus systems (given the same cycle time). When optimally applied, EtherCAT’s performance leads to improved accuracy, greater throughput, and thus to lowered costs

CONSTRUCTION FEATURES

PRODUCT'S FEATURES

	Operating Voltage 300 V
	Temperature static -30 °C / +90 °C dynamic -15 °C / +30 °C
	Dielectric Strength 1.5 kV acc.to EN 50395 Part 6 - 7
	Insulation Resistance ≥ 1 GΩ x km acc.to EN 50395 Part 8
	Electrical Resistance IEC 60228 Cl.5 EN 50395 Part. 5
	Impedance 150 Ω
	Capacitance 48 µF/m

MECHANICAL FEATURES

	Speed 180 m/min
	Bending Radius 10 x Ø
	Acceleration 2,0 m/sec²
	Cycles 200.000
	Torsion ±30°/1000 mm
	Pulling ≤ 20 N/mm²

MotionCables Code	OEM Code	Formation	Outer Diameter	Copper Weight	Outer Sheath
DFSE26Q01UR-VE	-	(1x4x26 AWG)	4.8	16.0	RAL 6018 Green PVC
Note The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.

Attenuazione

MHz	26 awg db/100 m
1.0	≤ 3,2
4.0	≤ 6,6
10.0	≤ 9,7
16.0	≤ 12,1
20.0	≤ 13,7
31,25.0	≤ 17,2
62,5.0	≤ 25,2
100.0	≤ 32,0