Control & Power

MotionLSZH

BP
PVC
300 / 500 V - 0.6/1.

Basic Performance

With the increased demand for safety in public areas and buildings, contractors are now being advised to install materials that are non-hazardous to members of the public in case of fire. It is now understood that smoke and poisonous fumes can be a greater risk to lives than that of fire alone. The biggest issue is the full understanding of what is a true low smoke halogen free cable.

To be assured you are buying a cable that will offer security during fire, it must pass 3 tests pertaining to halogen content, low smoke density and flame propagation.
MotionCables' range of low smoke halogen free cables are stringently tested to IEC and VDE standards to ensure the proper behaviour when installing these cables where human life or valuable property are exposed to a high risk of fire hazards.

CONSTRUCTION FEATURES


conductor	Class 6
insulation	Halogen Free TI 6
	black with white number +Y/G
shield	≥ 85%
separator	easy strip away tape
Outer Sheath
colour	/

PRODUCT'S FEATURES

	Operating Voltage 300 / 500 V - 0.6/1.
	Temperature static -30 °C / +70 °C dynamic -15 °C / +30 °C
	Dielectric Strength 3.0 kVac (up to 2,5) - 4.0 kVac (from 4,0).
	Insulation Resistance ≥ 1 GΩ x km acc.to EN 50395 Cl. 8.1
	Electrical Resistance IEC 60228 Cl.5 EN 50395 Part. 5

MECHANICAL FEATURES

	Speed
	Bending Radius 10 x Ø
	Acceleration
	Cycles
	Torsion ±30° /1000 mm
	Pulling ≤ 20 N/mm²

MotionCables Code	Formation	Outer Diameter	Copper Weight	Outer Sheath
MFS19G03M-G	(3G0,75)	6.7	55.0	RAL 7001 Gray Halogen Free TM 7
MFS19G04M-G	(4G0,75)	7.3	65.0	RAL 7001 Gray Halogen Free TM 7
MFS19G07M-G	(7G0,75)	8.6	93.0	RAL 7001 Gray Halogen Free TM 7
MFS19G12M-G	(12G0,75)	10.9	144.0	RAL 7001 Gray Halogen Free TM 7
Note The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.