MotionCables Logo

Control & Power

MotionMULTIWIRE SH

 DP
PVC
0.6 / 1.0 kV
MotionMULTIWIRE SH
Dynamic Performance
DP

The MotionMultiwire-SH series includes the most widely shielded shielded cables used in the wiring to control and power machine and industrial machines in general. Suitable for a pose that goes from fixed (BP version with PVC sheath) to high-end (HP version with PUR sheath), they have flexibility, reduced bending radius and chemical resistance in general. The tinned copper braid shield with a high coverage factor preserves the electromagnetic disturbance cable. The whole series is UL / CSA and EAC approved.
CONSTRUCTION FEATURES
Conductor Extra Flexible Bare Copper Class 6
Insulation Special Polypropylene
Colour Code Black With White Number +Y/G
Layup Twisted Pairs - Levels Divided By Non-Woven Tape
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Separator Easy Strip Away Tape
Outer Sheath PVC TM5
Colour Gray / RAL 7001
PRODUCT'S FEATURES
Operating Voltage
0.6 / 1.0 kV
Temperature
static -40 °C / +90 °C
dynamic -25 °C / +90 °C
Dielectric Strength
4.0 kV x 5 min.
acc.to EN 50395 Cl. 10.3
Insulation Resistance
≥ 1 GΩ x km
acc.to EN 50395 Cl. 8.1
Electrical Resistance
IEC 60228 Cl.6
EN 50395 Part. 5
 MECHANICAL FEATURES
Speed
300 m/min
Bending Radius
6.5 x Ø
Acceleration
20 m/sec2
Cycles
5.000.000
Torsion
±30° /1000 mm
Pulling
≤ 20 N/mm2

MotionCables Code OEM Code Formation Outer Diameter Copper Weight Outer Sheath
MDS15G03UR-G (3G1,5) 7.6 75.0 RAL 7001 Gray PVC TM5
MDS15G04UR-G (4G1,5) 8.2 91.0 RAL 7001 Gray PVC TM5
MDS15G05UR-G (5G1,5) 8.9 112.0 RAL 7001 Gray PVC TM5
MDS15G07UR-G (7G1,5) 11.0 145.0 RAL 7001 Gray PVC TM5
MDS15G12UR-G - (12G1,5) 12.9 247.0 RAL 7001 Gray PVC TM5
MDS15G18UR-G (18G1,5) 14.9 348.0 RAL 7001 Gray PVC TM5
MDS15G25UR-G (25G1,5) 18.2 498.0 RAL 7001 Gray PVC TM5
MDS15G34UR-G (34G1,5) 20.2 700.0 RAL 7001 Gray PVC TM5
MDS15G41UR-G (41G1,5) 22.3 844.0 RAL 7001 Gray PVC TM5
MDS15X02UR-G (2x1,5) 7.2 58.0 RAL 7001 Gray PVC TM5
Note
The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.