MotionCables Logo

Control & Power

MotionMULTIWIRE SH

 HP
PUR
0.6 / 1.0 kV
MotionMULTIWIRE SH
High Performance
HP

The MotionMultiwire-SH series includes the most widely shielded shielded cables used in the wiring to control and power machine and industrial machines in general. Suitable for a pose that goes from fixed (BP version with PVC sheath) to high-end (HP version with PUR sheath), they have flexibility, reduced bending radius and chemical resistance in general. The tinned copper braid shield with a high coverage factor preserves the electromagnetic disturbance cable. The whole series is UL / CSA and EAC approved.
CONSTRUCTION FEATURES
Conductor Extra Flexible Bare Copper Class 6
Insulation Special Polypropylene
Colour Code Black With White Number +Y/G
Layup Twisted Pairs - Levels Divided By Non-Woven Tape
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Separator Easy Strip Away Tape
Outer Sheath PUR
Colour Black / RAL 9005
PRODUCT'S FEATURES
Operating Voltage
0.6 / 1.0 kV
Temperature
static -50 °C / +90 °C
dynamic -40 °C / +90 °C
Dielectric Strength
4.0 kV x 5 min.
acc.to EN 50395 Cl. 10.3
Insulation Resistance
≥ 1 GΩ x km
acc.to EN 50395 Cl. 8.1
Electrical Resistance
IEC 60228 Cl.6
EN 50395 Part. 5
 MECHANICAL FEATURES
Speed
600 m/min
Bending Radius
6.5 x Ø
Acceleration
60 m/sec2
Cycles
10.000.000
Torsion
±30° /1000 mm
Pulling
≤ 20 N/mm2

MotionCables Code OEM Code Formation Outer Diameter Copper Weight Outer Sheath
MDS21G03UP-N (3G0,50) 6.9 39.0 RAL 9005 Black PUR
MDS21G04UP-N (4G0,50) 7.3 46.0 RAL 9005 Black PUR
MDS21G05UP-N (5G0,50) 7.8 54.0 RAL 9005 Black PUR
MDS21G07UP-N (7G0,50) 9.0 70.0 RAL 9005 Black PUR
MDS21G12UP-N (12G0,50) 10.8 100.0 RAL 9005 Black PUR
MDS21G18UP-N (18G0,50) 12.3 153.0 RAL 9005 Black PUR
MDS21G25UP-N (25G0,50) 14.3 202.0 RAL 9005 Black PUR
MDS21G34UP-N (34G0,50) 16.1 258.0 RAL 9005 Black PUR
MDS21G41UP-N (41G0,50) 17.3 311.0 RAL 9005 Black PUR
MDS21X02UP-N (2x0,50) 6.6 33.0 RAL 9005 Black PUR
Note
The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.