Control & Power

MotionMULTIWIRE

BP
PVC
0.6 / 1.0 kV

Basic Performance

The MotionMultiwire series incorporates the most commonly used cables used in power and tool power supply and industrial wiring harnesses in general. Suitable for a pose that goes from fixed (BP version with PVC sheath) to high-end (HP version with PUR sheath), they have flexibility, reduced bending radius and chemical resistance in general. The whole series is UL / CSA and EAC approved.

CONSTRUCTION FEATURES

Conductor	Bare Copper Class 5
Insulation	Special Polypropylene
Colour Code	black with white number +Y/G
Layup	Twisted Pairs - Levels divided by Non-Woven Tape
Separator	easy strip away tape
Outer Sheath	PVC
Colour	Gray / RAL 7001

PRODUCT'S FEATURES

	Operating Voltage 0.6 / 1.0 kV
	Temperature static -30 °C / +90 °C dynamic -15 °C / +30 °C
	Dielectric Strength 4.0 kV x 5 min. acc.to EN 50395 Cl. 10.3
	Insulation Resistance ≥ 1 GΩ x km acc.to EN 50395 Cl. 8.1
	Electrical Resistance IEC 60228 Cl.5 EN 50395 Part. 5

MECHANICAL FEATURES

	Speed 180 m/min
	Bending Radius 10 x Ø
	Acceleration 2,0 m/sec²
	Cycles 200.000
	Torsion ±30° /1000 mm
	Pulling ≤ 20 N/mm²

MotionCables Code	OEM Code	Formation	Outer Diameter	Copper Weight	Outer Sheath
Note The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.