MotionCables Logo

Control & Power Ul Listed

MotionUL MULTIWIRE SH

 BP
PVC
600 V
MotionUL MULTIWIRE SH
Basic Performance
BP

Shielded multicore control cables, UL / CSA LISTED, approved for use in the North American and Canda market. Suitable for fixed or mobile installation, built according to NFPA 79 and NFPA 70 specifications. The MotionUL MULTIWIRE series features: Tray Cable (Exposed Run), MTW, DB (Direct Burial), Sun Resistant, Oil Resistant, Wet Resistant, Flame Resistant and Fire Retardant, High Flexible (on request). The NEC installation code (NFPA 70 2017) permits the use of TC-ER cables in locations Class I div. 2 and Class II div. 2.
CONSTRUCTION FEATURES
Conductor Flexible Bare Copper Class 5
Insulation Special PVC
Colour Code Black/White Numbered Pairs
Layup Twisted Pairs - Levels Divided By Non-Woven Tape
Shield Tinned Copper Wire Braid O.C. ≥ 85%
Separator Easy Strip Away Tape
Outer Sheath PVC TM5
Colour Black / RAL 9005
PRODUCT'S FEATURES
Operating Voltage
600 V
Temperature
static -40 °C / +90 °C
dynamic -
Dielectric Strength
6.0 kV x 5 min
Insulation Resistance
≥ 200 MΩ x km
acc.to EN 50395 Part 8
Electrical Resistance
IEC 60228 Cl.5
EN 50395 Part. 5
 MECHANICAL FEATURES
Speed
180 m/min
Bending Radius
10 x Ø
Acceleration
2,0 m/sec2
Cycles
200.000
Torsion
±30° /1000 mm
Pulling
≤ 20 N/mm2

MotionCables Code OEM Code Formation Outer Diameter Copper Weight Outer Sheath
UFS13G03UCR-N (3G2,5) 10.5 111.0 RAL 9005 Black PVC TM5
UFS13G04UCR-N (4G2,5) 11.4 141.0 RAL 9005 Black PVC TM5
UFS13G05UCR-N (5G2,5) 12.5 165.0 RAL 9005 Black PVC TM5
UFS13G07UCR-N (7G2,5) 14.6 248.0 RAL 9005 Black PVC TM5
UFS13G08UCR-N (8G2,5) 16.8 282.0 RAL 9005 Black PVC TM5
UFS13G12UCR-N (12G2,5) 18.5 379.0 RAL 9005 Black PVC TM5
UFS13G18UCR-N (18G2,5) 22.6 540.0 RAL 9005 Black PVC TM5
UFS13G25UCR-N (25G2,5) 25.5 710.0 RAL 9005 Black PVC TM5
UFS13X02UCR-N (2x2,5) 10.0 85.0 RAL 9005 Black PVC TM5
Note
The data reported here are not binding and may be changed based on technical choices, modifications and/or improvements the manufacturer deems necessary. Reference to trademarks and standards is made for reference or information purposes only. These trademarks and standards are the exclusive property of their respective owners.