| Dynamic Performance | |
|---|---|
| Speed | 300 m/min |
| Bending Radius | 6.5 x Ø |
| Acceleration | 20 m/sec2 |
| Cycles | 5.000.000 |
| Torsion | ±30°/1000 mm |
| Pulling | ≤ 20 N/mm2 |
CAN fieldbus (Controller Area Network) was developed by Bosch® to connect the network of command devices, sensors and actuators in production lines of the car industry. The maximum length of the bus depends on the transmission speed rate and the selected conductor sizes: 20 metres for 1 Mbps / 100 metres for 500 kbps / 500 metres for 125 kbps / 1km for 50 kbps. MotionCables provide CAN BUS cables for application from static to high dynamic, with PVC or PUR outer sheath.
Note: CAN Open is a registered trademark of CiA (CAN in Automation Organization)
 |
Operating Voltage | 30 V |
 |
Temperature | Fixed -40 °C / +90 °C Dynamic -25 °C / +90 °C |
 |
Dielectric Strength | 1.5 kV acc.to EN 50395 Part 6 - 7 |
 |
Insulation Resistance | ≥ 1 GΩ x km acc.to EN 50395 Part 8 |
 |
Electrical Resistance | IEC 60228 Cl.6 EN 50395 Part. 5 |
 |
Impedance | 120 Ω |
 |
Capacitance | 44 µF/m - 42 µF/m |
 |
||
details
Construction Features
Complete datasheet with construction available upon demand |
Product's Features
 |
Oil Resistant (0-III) |
|---|---|
| EN 50363-4-1, UL 1581 | |
 |
Flame Resistant |
| IEC 60332-1-2; UL VW1; UL FT 1 | |
 |
Good Flexibility |
| EN 50289-3-9 |
Mechanical Features
 |
 |
 |
 |
| CYCLES | BENDING RAD. | SPEED | ACCELL. |
|---|---|---|---|
| 5.000.000 | 6.5 x Ø | 300 m/min | 20 m/sec2 |
Similar Products - DRIVEConn® MT - BUS
