| Dynamic Performance | |
|---|---|
| Speed | 300 m/min |
| Bending Radius | 6.5 x Ø |
| Acceleration | 20 m/sec2 |
| Cycles | 5.000.000 |
| Torsion | ±30°/1000 mm |
| Pulling | ≤ 20 N/mm2 |
Rotary encoder cables, low capacitance thanks to PP insulation. UL/CSA approved and DESINA conform; suitable for fixed up to high dynamic movement in power-chains. Oil resistant, EMC-compliant, flame-retardant according to IEC 60332-1-2 and FT1. Designed conform to Bosch Rexroth INDRAMAT® standard INK.
Note: The reported Indramat INK codes are trademarks of Bosch Rexroth AG and are for comparative purposes only. Desina® is a German machine tool builders (VDW) registered trademark. The article codes refer to existing MotionCables products. The drawings are not on a scale and do not represent a detailed picture of the products they refer to.
 |
Operating Voltage | 30 V (VDE) / 300 V ( |
 |
Temperature | Fixed -40 °C / +90 °C Dynamic -25 °C / +90 °C |
 |
Dielectric Strength | 1.5 kV acc.to EN 50395 Part 6 - 7 |
 |
Insulation Resistance | ≥ 1 GΩ x km acc.to EN 50395 Part 8 |
 |
Electrical Resistance | IEC 60228 Cl.6 EN 50395 Part. 5 |
 |
||
details
Construction Features
Complete datasheet with construction available upon demand |
Product's Features
 |
Oil Resistant (0-III) |
|---|---|
| EN 50363-4-1, UL 1581 | |
 |
Flame Resistant |
| IEC 60332-1-2; UL VW1; UL FT 1 | |
 |
Good Flexibility |
| EN 50289-3-9 |
Mechanical Features
 |
 |
 |
 |
| CYCLES | BENDING RAD. | SPEED | ACCELL. |
|---|---|---|---|
| 5.000.000 | 6.5 x Ø | 300 m/min | 20 m/sec2 |
Similar Products - DRIVEConn® MT - FEEDBACK
