| Dynamic Performance | |
|---|---|
| Speed | 300 m/min |
| Bending Radius | 6.5 x Ø |
| Acceleration | 20 m/sec2 |
| Cycles | 5.000.000 |
| Torsion | ±30°/1000 mm |
| Pulling | ≤ 20 N/mm2 |
Rotary encoder cables, low capacitacne thanks to PP insulation. UL/CSA approved and DESINA conform; suitable for fixed up to high dynamic movement in power-chains. Oil resistant, EMC-compliant, flame-retardant according to IEC 60332-1-2 and FT1. Designed conform to SIEMENS® standard 6FX (5008 for fixed installation, 5008 Plus for dynamic and 8008 for high dynamic).
Note: Siemens article designations are registered trademarks of Siemens AG, and are listed for comparison purposes only. DESINA® is a registered trademark of the German Machine Tool Builders' Association (VDW). Article numbers refer to genuine MotionCables products. Drawings are not to scale and do not represent detailed images of the respective products.
 |
Operating Voltage | 30 V (VDE) / 300 V ( |
 |
Temperature | Fixed -40 °C / +90 °C Dynamic -25 °C / +90 °C |
 |
Dielectric Strength | 1.5 kV acc.to EN 50395 Part 6 - 7 |
 |
Insulation Resistance | ≥ 1 GΩ x km acc.to EN 50395 Part 8 |
 |
Electrical Resistance | IEC 60228 Cl.6 EN 50395 Part. 5 |
 |
||
details
Complete datasheet with construction available upon demand |
 |
Oil Resistant (0-III) |
|---|---|
| EN 50363-4-1, UL 1581 | |
 |
Flame Resistant |
| IEC 60332-1-2; UL VW1; UL FT 1 | |
 |
Good Flexibility |
| EN 50289-3-9 |
 |
 |
 |
 |
| CYCLES | BENDING RAD. | SPEED | ACCELL. |
|---|---|---|---|
| 5.000.000 | 6.5 x Ø | 300 m/min | 20 m/sec2 |
Similar Products - DRIVEConn® MT - FEEDBACK
