SERVO eq. BOSCH REXROTH®

High Performance
Speed	600 m/min
Bending Radius	6.5 x Ø
Acceleration	60 m/sec²
Cycles	10.000.000
Torsion	±30°/1000 mm
Pulling	≤ 20 N/mm²

Cables conforming to BOSCH REXROTH INDRAMAT® standard, designed for power and control actuator drive systems. Highly flexible conductors and PVC-resistant PVC or PUR outer sheaths provide a suitable product for a wide range of high performance, ranging from fixed applications to high-speed drag chains. High dynamic parameters, reduced bending radii, and chemical resistance to oils and industrial fluids. The PUR sheath version is also suitable for low-temperature applications. Low dielectric capacity, shielded high-tinned copper braid for high EMC protection and an Indramat standard construction. The cables are UL / CSA and EAC approved and follow the DESINA standard.

Note: The reported Indramat INK codes are trademarks of Bosch Rexroth AG and are for comparative purposes only. Desina® is a registered trademark of the German machine tool builders (VDW). The article codes refer to existing MotionCables products. The drawings are not on a scale and do not represent a detailed picture of the products to which they refer.

	Operating Voltage	0.6 / 1.0 kV
	Temperature	Fixed -50 °C / +90 °C Dynamic -40 °C / +90 °C
	Dielectric Strength	4.0 kV acc.to EN 50395 Part 6 - 7
	Insulation Resistance	≥ 1 GΩ x km acc.to EN 50395 Part 8
	Electrical Resistance	IEC 60228 Cl.6 acc.to EN 50395 Part. 5

Other Performance Levels

BP Basic Performance

DP Dynamic Performance

DATASHEET

details

MotionCables Code	OEM Code	Formation	Outer Diameter	Copper Weight	Outer Sheath
SDSI19G06UP-A	INK 670	[4G0,75+(2x0,50)]	9.5	73.0	RAL 2003 PUR
SDSI17G08UP-A	INK 653	[4G1,0+2x(2x0,75)]	11.6	170.0	RAL 2003 PUR
SDSI15G08UP-A	INK 650	[4G1,5+2x(2x0,75)]	12.2	189.0	RAL 2003 PUR
SDSI13G08UP-A	INK 602	[4G2,5+2x(2x1,0)]	14.7	223.0	RAL 2003 PUR
SDSI11G08UP-A	INK 603	[4G4+(2x1,0)+(2x1,5)]	16.5	309.0	RAL 2003 PUR
SDSI09G08UP-A	INK 604	[4G6+(2x1,0)+(2x1,5)]	18.0	395.0	RAL 2003 PUR
SDSI07G08UP-A	INK 605	[4G10+(2x1,0)+(2x1,5)]	22.0	575.0	RAL 2003 PUR
SDSI05G08UP-A	INK 606	[4G16+2x(2x1,5)]	25.5	850.0	RAL 2003 PUR
SDSI03G08UP-A	INK 607	[4G25+2x(2x1,5)]	29.0	1250.0	RAL 2003 PUR
SDSI02G08UP-A	INK 667	[4G35+2x(2x1,5)]	31.0	1588.0	RAL 2003 PUR
SDSI01G08UP-A	INK 668	[4G50+2x(2x2,5)]	36.3	2351.0	RAL 2003 PUR

Construction Features

Complete datasheet with construction available upon demand

Product's Features

	Oil Resistant (0-V)
	EN 50363-10-12, UL 1581
	Flame Resistant
	IEC 60332-1-2; UL VW1; UL FT 1
	Zero Halogen
	EN 60754-1
	Cold Resistant
	EN 60811-1-4
	Abrasion Resistant
	ASTM D 4060
	Ozone Resistant
	EN 50396 Art. 8.1.3
	UV Resistant
	HD605 Part. 2.4.20
	Microbe Resistant
	VDE 0282/10
	Mud Resistant
	NEK 606
	Water Resistant
	EM 60811-1-3