| Dynamic Performance | |
|---|---|
| Speed | 300 m/min |
| Bending Radius | 6.5 x Ø |
| Acceleration | 20 m/sec2 |
| Cycles | 5.000.000 |
| Torsion | ±30° /1000 mm |
| Pulling | ≤ 20 N/mm2 |
The MotionMultiwire-SH series includes the most widely shielded shielded cables used in the wiring to control and power machine and industrial machines in general. Suitable for a pose that goes from fixed (BP version with PVC sheath) to high-end (HP version with PUR sheath), they have flexibility, reduced bending radius and chemical resistance in general. The tinned copper braid shield with a high coverage factor preserves the electromagnetic disturbance cable. The whole series is UL / CSA and EAC approved.
 |
Operating Voltage | 0.6 / 1.0 kV |
 |
Temperature | Fixed -40 °C / +90 °C Dynamic -25 °C / +90 °C |
 |
Dielectric Strength | 4.0 kV x 5 min. acc.to EN 50395 Cl. 10.3 |
 |
Insulation Resistance | ≥ 1 GΩ x km acc.to EN 50395 Cl. 8.1 |
 |
Electrical Resistance | IEC 60228 Cl.6 EN 50395 Part. 5 |
 |
||
details
Construction Features
Complete datasheet with construction available upon demand |
Product's Features
 |
Oil Resistant (0-III) |
|---|---|
| EN 50363-4-1, UL 1581 | |
 |
Flame Resistant |
| IEC 60332-1-2; UL VW1; UL FT 1 | |
 |
Good Flexibility |
| EN 50289-3-9 |
Mechanical Features
 |
 |
 |
 |
| CYCLES | BENDING RAD. | SPEED | ACCELL. |
|---|---|---|---|
| 5.000.000 | 6.5 x Ø | 300 m/min | 20 m/sec2 |
Similar Products - Control & Power
